High pressure blowers - TRL 60 Hz

 
Kongskilde High Pressure Blowers - TRL

High pressure blowers - TRL 60 Hz

Pressure conveying systems are used to move grain from one place to another. Pressure conveying systems require grain to be fed directly into a hopper above the injector or rotary valve.

Benefits:

  • Minimal space for installation, the conveying pipes can reach anywhere.
  • Low weight of the conveying pipe means only small loads on buildings.
  • No heavy components to be installed in inaccessible places.
  • Wide range of modular pipe components and junctions means flexible installation options.
  • Only electrical installation to blower and rotary intake, which are centrally located.
  • Easy capacity regulation with dampers on the inlet of the rotary intake unit.
  • Maximum capacity is achieved with pressure conveying.
Find distributor

Technical specifications

TRL 30 TRL 50 TRL 100 TRL 150 TRL 200 TRL 300 TRL 500 TRL 600* TRL 750* TRL 1000*
Max. air pressure, inch WG 10 14 38 52 64 91 138 197 236 320
Max. air volume cfm 1200 1200 1100 1100 1100 1100 1100 1100 1100 1100
Motor connection 1) 1) 1) 2) 2) 2) 2) 2) 2) 2)
Motor, hp 3 5 10 15 20 30 50 60 75 100
Motor, RPM 3500 3500 3500 3500 3500 3500 3500 3500 3500 3500
* Max. air pressure and max. air volume measured at:

(OK 160)/(OK 200)/(without regulation)

Motor connection: 1) Direct coupled, 2) Belt drive.