High pressure blowers - TRL 50 Hz

 
Kongskilde High Pressure Blowers - TRL

High pressure blowers - TRL 50 Hz

Pressure conveying systems are used to move grain from one place to another. Pressure conveying systems require grain to be fed directly into a hopper above the injector or rotary valve.

Benefits:
  • Minimal space for installation, the conveying pipes can reach anywhere.
  • Low weight of the conveying pipe means only small loads on buildings.
  • No heavy components to be installed in inaccessible places.
  • Wide range of modular pipe components and junctions means flexible installation options.
  • Only electrical installation to blower and rotary intake, which are centrally located.
  • Easy capacity regulation with dampers on the inlet of the rotary intake unit.
  • Maximum capacity is achieved with pressure conveying.
Find distributor

Technical specifications

Model Max. air pressure, mm WG Max. air volume (/h)* Motor, kw (hp) Motor, RPM Number of rotors
TRL 20 250 1900.0 m³ 1.5 (2) 3000 1
TRL 40 350 2600.0 m³ 3 (4) 3000 1
TRL 55 650 1800.0 m³ 4 (5.5) 3000 1
TRL 75 650 3200.0 m³ 5.5 (7.5) 3000 1
TRL 100 950 1800.0 m³ 7.5 (10) 3000 1
TRL 150 1300 1800.0 m³ 11 (15) 3000 1
TRL 200 1700 1800.0 m³ 15 (20) 3000 1
TRL 300 2300 1800.0 m³ 22 (30) 3000 2
TRL 500 3500 1800.0 m³ 37 (50) 3000 3
TRL 600** 5400 1800.0 m³ 45 (60) 2900 5
TRL 750** 6700 1800.0 m³ 55 (75) 2900 5
TRL 1000** 8000 1800.0 m³ 75 (100) 2900 5
*) Venturi required for TRL20 - TRL40.

**) OK160 piping - with air regulator.